الوصف
The Hstfire+ 1-16 range of fire alarm control
panels are microprocessor controlled and are
available with 1 to 16 sense zones (detector
zones) dependent on the model.The panels have
2 alarm zones (bell zones), zone disable facility,
one man test, a class change input, non-latching
facility, a permanent 28V fused supply, a 28V
supply energized on fire, one set of volt free
changeover contacts which operate on fault, and
two sets of volt free changeover contacts which
operate on fire
HP103
Conventional Fire Alarm Control Panel
Repeaters
The HP103 Repeater is compatible with all
HP101 control panels Repeaters are available
with 16 zones with 24V powered (DC). Mains
powered repeaters require only a two core data
cable from the main control panel. 24V DC
versions require an additional two cores for
power either from the main panel or from another
24V DC source.
A mixture of Repeaters or Ancillary boards up to a
maximum of 4of each type can be connected to a
control panel and each is allocated an address
from 1 to 4 using a binary coded DIP switch. The
total length of the data cable from the main panel
to the last repeater must not exceed 1200
metres
المراجعات
لا توجد مراجعات بعد.