This series detector can be used in all areas where
photoelectric smoke detector,heat detector or multi
detector is required. It is suited for fires ranging from
smoldering to flaming fires.
This series detectro is designed to provide open area
protection and to be used with most conventional fire
alarm control panel.
Two LEDs on each detector provide local 360° visible for
indication of status. In the normal condition the LEDs
flash red every 5 seconds. When the detector senses
smoke or heat goes into pre-alarm sensitivity the LEDs
will flash red every 1 second. When the detector senses
smoke or heat goes into alarm the LEDs will latch on red.
The alarm can be reset only by a momentary power
The detectors meets the requirements of the EN54-5&7
standards and were got the certification by Intertek